Monel K500 Plates, Sheets & Monel K500 Round Bars
Monel K500 Rods Manufacturers, Alloy K500 Sheet Exporters, Monel Alloy K500 Round Bars, Monel K500 Bars Suppliers in India.
Hindustan Steel Engineering Company is one of the pioneer dealers and stockist of Monel K500 Round Bars , which can easily be welded by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. The nickel and copper contents of the ore were in the approximate ratio which is now formally specified for the alloy.
Monel K500 Flat Bars of Hindustan Steel Engineering Company is a precipitation-hardenable nickel-copper alloy that combines high strength, corrosion resistance and non-magnetic properties. There is no need for post weld heat treatment, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement. Like most other nickel alloys, Monel K500 Hex Bars offered by Hindustan Steel Engineering Company is typically tough to machine and will work harden.
It is a solid-solution binary alloy, which has excellent results which can be obtained if you make the correct choices for tooling and machining. As nickel and copper are mutually soluble in all proportions, Monel K500 Sheets (WN 2.4375) is a single-phase alloy and will exhibit only randomly disperse non-metallic inclusions. It is perhaps the most resistant of all commonly used engineering alloys, which offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point.
Monel K500 Plates offered by Hindustan Steel Engineering Company has excellent mechanical properties at subzero temperatures, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.
UNS N05500 Monel Alloy K500 Plates Distributor, N05500 Round Rods, WNR 2.4375 Monel K500 Steel Bars, Alloy K500 Strip Dealers in India.
Monel Alloy K500 Specification
|STANDARD||Monel Alloy K500|
|WERKSTOFF NR.||W.Nr 2.4375|
|Sheets & Plates||ASTM B127|
|Round Bars||ASTM B164|
|Applications||Oil and Gas, Oil well industry, Chemical & Hydrocarbon Processing Equipment, Industrial Heat Exchangers, Fasteners, Valves, Pumps Shafts etc.|
Chemical Composition for WNR 2.4375 Monel Alloy K500
|1.5 max||63.0-70.0||.50 max||Remainder||.35-.85||.25 max||2.30-3.15||2.0 max||.01 max|
Mechanical Properties UNS N05500 Alloy Monel K500
|Product Form||Condition||.2% Yield (ksi)||Hardness||Tensile (ksi)||Elongation %|
|Rod & Bar||Hot-Finished, Aged||100-150||27-38 HRC||140-190||30-20|
|Rod & Bar||Cold-Drawn, Annealed, Aged||85-120||24-35 HRC||130-190||30-20|
|Rod & Bar||Hot Finished, Annealed, Aged||85-120||24-35 HRC||130-165||35-20|
|Rod & Bar||Cold-Drawn, Aged||95-160||25-41 HRC||135-185||30-15|
|Rod & Bar||Hot Finished, Annealed||40-60||75-90 HRB||90-110||45-25|
|Sheet||Cold-Rolled, Annealed||40-65||85 HRB Max||90-105||45-25|
|Plate||Hot-Finished, Aged||100-135||27-37 HRC||140-180||30-20|